To wire the 3 gang switch to the FLUXO, connect the live feed cable to the vent unit, linking the live and neutral. Use a 4-core cable from the vent to the switch: connect one core to the GND terminal, one to S1, one to S2, and one to S3, looping them to the respective switch terminals.
Understanding the Wiring Process for FLUXO
Wiring a 3 gang switch to the FLUXO ventilation unit may seem daunting, but with a clear understanding of the components and steps involved, it can be straightforward. This guide will provide you with the necessary information to successfully wire the system, ensuring optimal performance and compliance with safety standards.
Components Required
- FLUXO Ventilation Unit: This is the main unit that will provide continuous mechanical ventilation.
- 3 Gang Switch: Allows control of the FLUXO unit from multiple locations.
- Cabling:
- 3-core (twin & earth) cable for the power supply to the FLUXO.
- 4-core (triple & earth) cable for connecting the switch to the FLUXO unit.
- Tools:
- Screwdriver
- Wire strippers
- Electrical tape
- Voltage tester
Wiring the Power Supply
- Identify the Power Supply: The FLUXO unit requires a live feed cable. Ensure that the power supply is switched off before starting any wiring.
- Connect the Live and Neutral:
- Use the 3-core cable to connect the live (brown) and neutral (blue) wires from the power supply to the corresponding terminals on the FLUXO unit.
- The earth wire (green/yellow) does not need to be connected, as the FLUXO is double insulated.
Wiring the Switch
- Run the 4-Core Cable: From the FLUXO unit to the location of the 3 gang switch, run the 4-core cable. This cable will facilitate control over the unit’s various functions.
- Connect the Ground (GND) Terminal:
- Connect one core (green/yellow) to the GND terminal in the FLUXO unit.
- Loop this core to the three common terminals on the back of the switch. This ensures that all switch positions share a common ground.
- Connect the Switch Terminals:
- S1 Connection: Connect one core (usually brown) to the S1 terminal in the FLUXO and loop it to the L1 terminal of the left switch (when facing the switch).
- S2 Connection: Connect another core (also brown) to the S2 terminal in the FLUXO and loop it to the L1 terminal of the middle switch.
- S3 Connection: Connect the final core (again, brown) to the S3 terminal in the FLUXO and loop it to the L1 terminal of the right switch.
Final Steps
- Check Connections: Before powering on, double-check all connections to ensure they are secure and correctly placed. Use a voltage tester to verify that there are no live wires where they shouldn’t be.
- Power On: Once everything is securely connected, turn the power back on. Test the switches to ensure that they control the FLUXO unit as expected.
- Maintenance: Regularly check the wiring and connections for any signs of wear or damage. Ensure that the FLUXO unit is functioning correctly to maintain optimal air quality.
Safety Considerations
- Always ensure that the power supply is turned off before starting any electrical work.
- If unsure about any aspect of the wiring process, consult a qualified electrician.
- Follow local electrical standards and regulations to ensure compliance and safety.